![[Previous image]](bw_prev.gif)
|
![[Return to Index]](bw_index.gif)
|
![[Next image]](bw_next.gif)
|
|
I used a hammer and a backing block to form the metal back into the correct shape so a stiffener will be able to slip over this area. Small die grinder and wire brush on a drill used to prep the area.
|
|
|
|
|
|
|
I used a hammer and a backing block to form the metal back into the correct shape so a stiffener will be able to slip over this area. Small die grinder and wire brush on a drill used to prep the area.
|
|
|